Nitrogen Inflators

2429 Views

In Stock

Quick Overview

Tyre Retreading Machinery
AUTOMATIC DIGITAL TYRE INFLATOR
Best Features	Back
174PSI/12bar/1200kPa Output pressure make the unit a fit for almost any size automotive service facility ** Auto-Start Inflation Fully automated, fully programmable, micro-processor controlled conversion System.

Operating Steps

Set final target pressure using the + and – buttons. The LCD screen will show the target pressure.
Connect air hose to tyre valve stem.
When unit “beeps” and the LCD screen flashes the target pressure, tyre inflation is complete.
If tyre has zero pressure, the “FILL” button must be pressed to commence inflation.

Technical Details

Power Requirement	100-240V 50/60HZ
Power Consumption	10VA
Operating Temperature Range	20℃/-4°F to 70℃/158°F
Max InletAir/Nitrogen Supply	145PSI /10bar /1000kPa
Operating Range	0-29PSI/0-2.0bar/0-200kPa
Accuracy	±1PSI/0.07bar/7kPa
Resolution	1PSI/0.1bar/5kPa
Units of Measurement	PSI/bar/kPa

SPECIFICATIONS

Auto-start inflation
Automatic zero drift adjustment
Remain at last setting
Comprehensive diagnostics and error reporting
Audible and visual end of the cycle signal indicators
Large backlight LCD display
Vandal resistant mechanical switches
Suits standard nitrogen bottle/Direct nitrogen supply from generator/Air compressor
1 Nos.*10M/32.8ft standard hose with single clip-on open type chuck

Tyre Retreading Machinery
AUTOMATIC DIGITAL TYRE INFLATOR
Best Features
Pump the air from the tyre by the internal vacuum generator before nitrogen inflation * Auto-Start Inflation * Single Tyre Application

Operating Steps

Set final target pressure using the + and – buttons. The upper LED screen will show the target pressure.
Remove the tyre valve core to exhaust the residual air from the tyre, then re-fit the tyre valve core.
Connect air hose to tyre valve stem.
Press “START” key.
When unit “beeps” and the upper LED screen flashes “END”, tyre inflation is complete.

Technical Details

Dimensions (HeightWidthDepth）	1255mm700mm435mm 49.4”27.6”17.1”
Net Weight	87kg/191.8lbs
Gross Weight	104kg/229.3lbs
Power Requirement	100-240Vac 50/60HZ
Power Consumption	30VA
Operating Temperature Range	20℃/-4°F to 70℃/158°F
Compressed Air Input Range	87-145PSI/6-10bar /600-1000kPa
Compressed Air Input Flow	500L/min (17.0cfm)
Nitrogen Purity	95-99+%
Nitrogen Output	58L/min (2.0cfm) @116PSI/8bar/800kPa
Absorption	pressure
Maximum Nitrogen Pressure in Tank	102PSI/7bar/700kPa

SPECIFICATIONS

Generates nitrogen from your compressed air
2 Pre-Filters
50L/13.2gal (us) internal nitrogen storage tank
Auto-start inflation
Remain at last setting
Audible and visual end of the cycle signal indicators
LED display
1 Nos.*10m/32.8ft standard hose with single clip-on open tyre chuck
Nitrogen purity test port
1Nos Nitrogen Outlet to connect the unit and your tyre inflation gun
To increase the tyre nitrogen purity, the valve core must be removed manually and allow all the air to escape from the tyre. Before inflate tyre with nitrogen, firstly the unit will pump the residual air from the tyre by the internal vacuum generator then inflate nitrogen to the target tyre pressure